CPCCBC4053 Apply building codes and standards to the construction process :
CPCCBC4053 Apply building codes and standards to the construction process
CPCCBC4053 Apply building codes and standards to the construction process ASSESSMENT TASKS
SECTION A – REQUIRED SKILLS
Apply building codes Assessment Task 1 – Written Assignment
Instructions
Carry out an inspection of an existing Type C building and identify compliance with NCC Section C performance requirements for fire resistance.
You must complete this assessment task on your own, and are not to work in groups. It must be your own work
The intent of this assessment task is to demonstrate your ability to recognise active and passive fire resistance measures in a Type C building, and any NCC Volume 1 Section C compliance issues or defects as well as any other non-fire resistance defects that you encounter.
Your trainer/assessor will then guide you through the process to complete this assessment task.
Answer template
Item No. Fire resistance measureActive Passive Compliant? – if No, what needs to be done to achieve compliance? Fire door (level 1 North) Fire door (level 1 South) Fire extinguisher (water) Fire extinguisher (CO2) Smoke detector External wall of building Fire hose reel Fire blanket in kitchenette Break glass alarm 10)Automatic fire doors Item No.Other NCC compliance item noted Compliant? – if No, what needs to be done to achieve compliance?1)Display of Occupancy Certificate 2)Fire Spring Sistem 3)Smoke and heat vents 4)Warning and operational signs CPCCBC4053 Applying building codes and standards to the construction process
SECTION B – REQUIRED KNOWLEDGE
Assessment Task 2 – Written Questions
You are required to provide a satisfactory response to each question below to complete this assessment.
Question 1
What are the names of the three volumes of the NCC and which classes of building does each apply to?
Name of VolumeApplicable Class of buildings CPCCBC4053 Applying building codes and standards to the construction process
Question 2
What does the NCC provide?
Things the NCC provides1) 2) 3) 4) 5) CPCCBC4053 Applying building codes and standards to the construction process
Question 3
Provide an example of an NCC mandatory reference document?
Mandatory NCC reference documents are:
Question 4
List seven (7) Standards that apply to low-rise Type C Construction.
Answer:
Number of StandardName of StandardNCC Section where the standard is referenced CPCCBC4053 Applying building codes and standards to the construction process
Question 5
What building documentation is taken into account by a Relevant Building Surveyor to determine the class of a building? Give five (5) examples.
Answer:
No.Type of building documentation1) 2) 3) 4) 5) CPCCBC4053 Applying building codes and standards to the construction process
Question 6
Name the class of building in the list below
Answer:
Name of building useClass of building1) 2) 3) 4) 5) CPCCBC4053 Applying building codes and standards to the construction process
Question 7
Name the use of the building in the list of building classes below.
Answer:
Class of buildingName of building use1) 2) 3) 4) 5) CPCCBC4053 Apply building codes and standards to the construction process
Question 8
A low-rise building contains more than one classification: a workshop and a laboratory on the ground floor and an office on the second storey. The laboratory only occupies 8% of the total floor area on the ground floor. The office occupies 100% of the floor area on the second storey.
What are the relevant classes for this building?
Answer:
A6.8 Class 8 buildings A6.5 Class 8 buildings
Question 9
What is the difference between a Performance Solution and a Deemed-to-Satisfy Solution?
Answer:
CPCCBC4053 Applying building codes and standards to the construction process
Question 10
Section A of the NCC Volume 1 sets out Governing Requirements. What section contains requirements for classifying buildings?
Answer:
CPCCBC4053 Applying building codes and standards to the construction process
Question 11
Sections B to J of the NCC Volume 1 set out the mandatory performance requirements, verification methods, Deemed-to-Satisfy requirements and solutions for buildings and structures. What is the name of each section? (Note: Section I is not used by the NCC)
Answer:
NCC SectionName of SectionB C D E F G H J CPCCBC4053 Applying building codes and standards to the construction process
What are the four allowable verification methods for proposed performance solutions?
Answer:
Performance Solution Verification Method1) 2) 3) 4) CPCCBC4053 Applying building codes and standards to the construction process
Question 13
What are the two allowable verification methods for proposed Deemed-to-Satisfy solutions?
Answer:
No.Deemed-to-Satisfy Solution Verification Method1) 2) CPCCBC4053 Applying building codes and standards to the construction process
Question 14
Where in the NCC Volume 1 would I find the performance requirements for damp and weatherproofing?
Answer:
CPCCBC4053 Applying building codes and standards to the construction process
Question 15
Who is responsible for ensuring that construction complies with the NCC Volume 1 Performance Requirements?
Answer:
CPCCBC4053 Applying building codes and standards to the construction process
Question 16
What are the three (3) causes of defective construction work?
Answer:
When developing a performance solution, what Industry professional would you consult?
Answer:
CPCCBC4053 Applying building codes and standards to the construction process
Question 18
Name the six (6) steps to follow when identifying which performance requirements apply to a project.
Answer:
Question 19
Name five (5) forms of evidence that can be used to verify suitability of a performance solution.
Answer:
Question 20
Who is qualified to provide expert judgement of a performance solution?
Answer:
CPCCBC4053 Applying building codes and standards to the construction process
Question 21
What are the two (2) key aims of the NCC regarding fire resistance?
Answer:
Question 22
What do the following fire resistance terms mean?
Answer:
Fire resistance termMeaning CPCCBC4053 Applying building codes and standards to the construction process
Question 23
Answer:
a) b)
Question 24
If 90 minutes insulation is required for an external wall, using AS 3700, what minimum thickness of wall is required for fired clay brickwork?
CPCCBC4053 Applying building codes and standards to the construction process
Question 25
Answers:
Question 26
Answers:
Question 27
When constructing a wide-span roof describe two (2) advantages and two (2) disadvantages
Answer:
Advantage Advantage Disadvantage Disadvantage CPCCBC4053 Applying building codes and standards to the construction process
SECTION C – PERFORMANCE ACTIVITY
Assessment Task 3 – Major Project
Using plans and specifications provided by your trainer or your own building documentation, apply codes and standards to the construction process for two low-rise building projects:
Task 3.1 – The first project is to be a class 2, 3 or 9 building;
Task 3.2 – The second project is to be a class 5, 6, 7 or 8 building.
The candidate must satisfactorily complete the following for each project:
Determine the class of building using the National Construction Code (NCC) classifications
Determine the type of construction and use from the project documentation;
Identify current building and construction codes and Australian Standards relevant to the project;
Apply NCC Performance Requirements in relation to the design and construction of the building addressing:
Structure;
Fire protection
access and egress
services and equipment
health and amenities
ancillary provisions
energy efficiency
Apply Performance solutions to ensure construction complies with Performance Requirements and note any Deemed to Satisfy solutions that have been adopted;
If the building is under construction or has been constructed, identify any faults and problems and propose actions to rectify;
Identify relevant environmental issues and solutions;
Identify and summarise the builder’s OH&S requirements, organisational policies and procedures including Construction Management Plan, Environmental Management Plan and Quality Plan relevant to the project.
As a guide, each project report is expected to be a minimum of five single sided A4 pages.
CPCCBC4053 Assessment Task 3-1 – Student Name: Date: 7 Jul 2022Project Name:1)Class :2)Type of construction: 5) NCC Performance solutions including DtS solutions 6) Faults and problemsProposed actions to rectify 7) Environmental issuesProposed solutions 8) Builder’s OH&S plan and proceduresComments Builder’s other plans, policies, procedures and guidelines: e.g., Construction Management Plan, Quality PlanComments CPCCBC4053 Applying building codes and standards to the construction process
CPCCBC4053 Assessment Task 3-2 – Student Name: Date: 7 Jul 2022Project Name:1)Class :2)Type of construction: The performance criteria for construction methods in Volume 1 are summarised in the table below: Section Section title Provisions Performance requirements B Structure B1 – Structural provisions BP1.1 – Structural reliability BP1.2 – Structural resistance BP1.3 – Glass installations at risk of human impact BP1.4 – Buildings in flood areas C Fire resistance D E F G Ancillary provisions H Special use buildings I Not used J Energy efficiency 5) NCC Performance solutions including DtS solutions 6) Faults and problemsProposed actions to rectify 7) Environmental issuesProposed solutions 8) Builder’s OH&S plan and proceduresComments CPCCBC4053 Applying building codes and standards to the construction process
Visit:https://auspali.info/
Also visit:https://www.notesnepal.com/archives/767
The post CPCCBC4053 Apply building codes and standards to the construction process appeared first on Aussienment.
